Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Bathroom Remodeling: The Sacramento Owner’s Guide
A full Unilock bathroom remodel in Sacramento typically runs $9,000 to $28,000 installed, depending on whether you’re replacing a single wall assembly or gutting the room to the studs. We stock Unilock-compatible pavers, wall blocks, and coping for bathroom applications, and our crews can usually start within two weeks of the written estimate. Most owners call us after they notice water staining along the base of a Unilock shower surround, or when a paver floor has started to heave from moisture getting into the substrate.
The failure path is almost always the same: water finds a seam, the Sacramento clay soil shifts underneath, and a stable surface becomes a cracked, uneven mess. What starts as a cosmetic issue turns into a water-intrusion problem fast. Bradford Remodeling Co Sacramento is an independent service provider, not affiliated with Unilock, but we install their product line regularly and know where it holds up and where it needs reinforcement in our local conditions.
Key takeaways:
- Installed Unilock bathroom remodels in Sacramento run $9,000 – $28,000, with the written price locked before work starts.
- Unilock’s textured pavers give excellent wet-floor traction, but the substrate underneath determines whether the surface lasts 5 years or 30.
- Water intrusion at the paver-to-wall joint is the most common failure point we repair.
- Every completed job carries the 365-Day Done Right Promise: if it fails within a year, we return and correct it at no charge.
Which Unilock Models This Applies To
In bathrooms, homeowners typically use three Unilock product families: the Beacon Hill flagstone line for shower floors, Brussels Block or Courtstone for accent walls, and Unilock coping units for tub surrounds and bench caps. Each has different thickness specs, and that’s where compatibility gets tricky. Beacon Hill flagstone runs 1.25 to 2 inches thick with irregular edges, which means a shower floor needs a mud-bed substrate sloped at 1/4 inch per foot to drain properly. Brussels Block is a manufactured paver at 2.75 inches thick with tight joints, and Courtstone is a tumbled unit that gives you the aged look but demands sealed joints in wet areas.
Before you buy any replacement units, check the back of one existing paver. Unilock stamps some, but not all, of its products with a mold number on the underside. If you can’t find a stamp, measure the thickness with a tape measure to the nearest eighth of an inch and bring a photo of the surface texture when you call. Aftermarket equivalents exist for some lines, but Unilock’s color blends are proprietary, and a mismatched batch will be visible from across the room. For wet-area applications, we specify OEM Unilock units or a documented equivalent with the same coefficient of friction rating. That’s not a detail worth gambling on in a shower.
Styles & brands we work with
Signs Your Unilock Bathroom Remodeling Is Failing
- Water staining at the paver-to-wall joint. The sealant or grout line fails first, usually within 3 to 7 years in Sacramento’s dry summers and wet winters. Water wicks behind the paver and darkens the edges before you see any structural movement.
- Hollow-sounding pavers. Tap the surface with a wooden handle. A hollow sound means the paver has debonded from the mortar bed underneath. This is the earliest warning sign of a substrate failure, and it spreads quickly once one unit loosens.
- Shifting or rocking pavers underfoot. If a paver moves when you step on it, the bedding layer has eroded. In bathroom floors, this usually traces back to a missing or failed waterproofing membrane under the setting bed.
- Efflorescence that won’t scrub off. White mineral deposits keep returning because water is moving through the paver and evaporating. Efflorescence is a symptom, not the problem, and the problem is moisture trapped behind the surface.
- Grout or joint sand washing out after every shower. If you’re sweeping sand back into the joints weekly, the drainage plane is not working. Sacramento’s hard water accelerates this, and the fix usually requires pulling up the affected section and re-sloping the bed.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s how Unilock bathroom remodel pricing breaks down in Sacramento:
- Shower floor replacement (Beacon Hill or Courtstone): $4,500 – $12,000, depending on whether the existing mud bed can be saved or needs full demolition.
- Accent wall or tub surround with Unilock units: $3,500 – $10,000, including waterproofing membrane and new substrate.
- Full bathroom remodel with Unilock flooring and walls: $9,000 – $28,000, which covers rough-in verification, demolition, substrate rebuild, waterproofing, paver installation, sealing, and finish work.
The range is driven by what’s underneath the pavers more than the pavers themselves. A bathroom with intact subfloor and proper perimeter drainage sits at the lower end. A bathroom with rotted framing, a failed shower pan, or an unvented crawl space sits higher because we rebuild the structure before a single paver goes down. Every bid includes a written line-item price before work starts, and the 365-Day Done Right Promise means the finished job is guaranteed in writing for a full year. If it doesn’t hold, we come back and make it right at no charge.
DIY or Call Us?
You can safely check a few things yourself: run your hand along the wall-to-floor joint to feel for gaps, tap the pavers to map how many sound hollow, and take photos of any staining before and after showers. That information helps us price the job accurately over the phone.
What you should not do is pull up pavers yourself. Once you break the waterproofing plane, you’ve turned a repair into a rebuild, and a bathroom floor with compromised drainage becomes a mold source inside a wall cavity. Wet-area paver work also involves sloped mortar beds, membrane detailing at corners, and sealant selection matched to Sacramento’s water chemistry. Those are the failure points that separate a five-year remodel from a thirty-year one. If you’re seeing any of the symptoms above, call (279) 226-1509 and one of us will walk you through what we’re likely to find before we send a crew.
FAQs
A properly installed Unilock paver bathroom floor lasts 20 to 30 years in Sacramento’s climate, but the waterproofing membrane underneath typically needs attention at the 10 to 15 year mark. The pavers themselves rarely fail; the system around them is what gives out first. Call (279) 226-1509 if you’re seeing staining or movement, and we’ll tell you whether it’s a repair or a replacement.
Yes, if the failure is localized, we can remove the affected section, rebuild the substrate, and reset the original pavers. If water has spread under more than a third of the floor or the membrane is compromised, replacement is usually cheaper than chasing the problem piece by piece.
A shower floor replacement takes 3 to 5 working days including demolition, substrate work, installation, sealing, and cure time. A full bathroom remodel with Unilock walls and flooring typically runs 2 to 4 weeks depending on rough-in work and any structural repairs.
We keep a limited stock of Unilock Beacon Hill flagstone and Brussels Block for repairs, and we can source any current Unilock product line through our supplier network for a full remodel. Lead time on special orders runs 1 to 3 weeks. Call (279) 226-1509 with the model or measurements, and we’ll confirm availability before you commit to anything.
Straight scope, firm price, no surprises after the drywall goes up. That’s how Curtis Lane runs Bradford Remodeling Co Sacramento, and it applies to every Unilock bathroom remodel we install. Call (279) 226-1509 for a free, written estimate, and you’ll know exactly what the job costs before we ever put a tool to the floor.
Written by Curtis Lane, Owner, Bradford Remodeling Co Sacramento at Bradford Remodeling Co Sacramento, serving Sacramento and nearby areas.
