Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Kitchen Remodeling: The Sacramento Owner’s Guide
We install and service Jerith kitchen remodeling components across Sacramento, with most full kitchen remodels running $14,000 to $45,000 depending on cabinet layout, countertop material, and how much electrical or plumbing rough-in the job requires. If you’re searching this page, you likely have a Jerith cabinet hinge that’s stripped, a drawer glide that’s binding, or a door panel that’s delaminating after years of Sacramento’s dry heat and seasonal humidity swings. Here’s what we actually see on service calls and what it costs to make it right.
Which Jerith Models This Applies To
Jerith cabinetry runs on a few distinct hardware and panel systems, and the compatibility gotcha is this: Jerith’s older Sacramento-area installs, largely from the mid-2000s through early 2010s, used a 35mm cup hinge with a 9mm overlay, while the newer series moved to a 40mm cup with an 11mm overlay. A hinge from the wrong generation will mount but the door won’t sit flush, and you’ll chase that gap forever. The fastest way to identify what you have is to pull one hinge off and measure the bored cup diameter behind it, or look for the stamped model code on the hinge arm itself, typically a two-letter prefix followed by four digits.
We’re an independent Sacramento remodeling contractor, not affiliated with Jerith, and we source both OEM Jerith components and quality aftermarket equivalents for the older lines where Jerith has discontinued the part. For high-use pieces like drawer glides, we typically recommend a name-brand aftermarket glide (Blum and Salice both make direct-fit replacements for the older Jerith slide profiles) because the OEM originals were the weak point to begin with. For finish-matched face panels and door fronts, OEM is the only way to get the exact color and grain match.
Styles & brands we work with
Signs Your Jerith Kitchen Remodeling Is Failing
- Drawer that sticks or drops on one side: The nylon roller inside the glide has gone flat. Once one roller flattens, the drawer rides metal-on-metal and grooves the track, which means the glide needs replacement, not adjustment.
- Door that won’t stay closed or sags visibly: The hinge spring has lost tension or the mounting screws have stripped out of the cabinet face frame. In Sacramento’s dry summers, face-frame wood contracts and the screw holes wallow out over time.
- Laminate or veneer peeling at the bottom edge of a door panel: Moisture from sink splash and dishwasher steam gets under the edge banding. Once the edge band releases, the panel starts absorbing water and the failure accelerates quickly.
- Soft-close mechanism stopped working on one door but not others: The damper cartridge inside the hinge cup has blown its seal. Those cartridges are replaceable on most Jerith hinges without pulling the whole hinge assembly.
- Cabinet box pulling away from the wall at the top rail: This is usually a fastener issue, not a cabinet issue. Original installs sometimes used screws too short for the wall substrate, and Sacramento’s seasonal framing movement works them loose over a decade.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Sacramento pricing for Jerith cabinet repair and replacement parts breaks down like this:
- Single hinge or glide replacement: $45 – $110 per unit installed, including the replacement part
- Full door front replacement (OEM or matched aftermarket): $120 – $400 per door depending on size, finish, and panel profile
- Drawer box rebuild with new glides: $180 – $350 per drawer
- Complete cabinet replacement for one base or wall cabinet: $400 – $1,300 per cabinet
- Partial kitchen cabinet overhaul (doors, glides, hinges, end panels): $4,000 – $13,000, which often makes more sense than piecemeal repairs on an older Jerith layout
- Full kitchen remodel with new cabinetry and counters: $14,000 – $45,000
Every quote includes the part, the labor, the fasteners, and cleanup. The written price covers the whole job, start to finish, and the 365-Day Done Right Promise backs the work: if a hinge we installed fails or a door panel we hung doesn’t hold within the year, we come back and correct it at no charge. That’s the Garrison Standard, in writing, before any work begins.
DIY or Call Us?
Some of this is genuinely safe to check yourself. You can pull a drawer and inspect the glide rollers, or open a cabinet door and check whether the hinge screws are tight. Measuring a hinge cup for diameter and overlay takes five minutes and tells you exactly what generation of Jerith hardware you’re dealing with. Where homeowners get sideways is forcing a misaligned door, which strips the face-frame screw holes worse, or prying off edge-banded panels, which turns a $120 door replacement into a $400 one. If the part requires wall anchoring into unknown substrate, or if the cabinet is pulling away from the wall, that’s load-bearing work and it should be handled by someone who does this every week. Curtis Lane and our Sacramento crews have been matching Jerith parts and correcting bad installs for years. Call (279) 226-1509 and we’ll tell you over the phone whether it’s a $60 hinge or a full cabinet pull.
FAQs
With proper installation and normal use, Jerith cabinets in Sacramento typically last 20 to 30 years, though the hardware fails sooner. Hinges and drawer glides are the weak points and usually need replacement at 10 to 15 years. The cabinet boxes themselves hold up well if they were anchored correctly and kept dry.
No. Once a glide roller flattens or a hinge damper cartridge blows its seal, the internal component is done and there’s no reliable repair. The good news is both are inexpensive parts and the labor to replace them is quick. Call (279) 226-1509 and we’ll match the part before we even schedule the visit.
Replacing hinges or glides on an average Sacramento kitchen takes half a day to a full day, depending on how many doors and drawers we’re working on. A full door-front replacement on a whole kitchen runs two to three days because every panel has to be aligned, adjusted, and checked for an even reveal.
We keep the most common Jerith hinge and glide profiles in stock for Sacramento service calls, along with standard 35mm and 40mm cup hinges in the common overlays. Oddball panel profiles and finish-matched door fronts are ordered to spec, and that lead time gets spelled out in your written quote before you commit.
Written by Curtis Lane, Owner, Bradford Remodeling Co Sacramento at Bradford Remodeling Co Sacramento, serving Sacramento and nearby areas.
